Cad-cam problem | Engineering homework help

CAD-CAM Problem
Assignment : 2pm, 23th March 2018 (GMT)
Design/Optimise/Printÿ
Shown on the following sheet is the design brief for a customisable coat hook. ÿWorking to the provided design constraints you are to design, simulate and optimise your design to meet the following design requirements: ÿ
? Your design must be within the spatial restrictions shown in Figure 1.ÿ
? Your design must accept a typical clothes hanger, with a maximum wire thickness of 4mm and nominal hook radius of 20mm. ÿ
? Your design must be mounted by a single #6 self-tapping countersunk screw.ÿ
? Your design must support a load of 1kg, hung from the hook.ÿ
? Assuming a simulation material of Nylon 101, your final design must be within a Factor of Safety of 2 in all areas.ÿ
? Your design should be suitable for 3D printing on an Ultimaker 2 Extended+ 3D printer.ÿ